Subaru Forester 2002-2007 SG

Headunit Installation Requirements

You will need

Facia - Single DIN : 

Required

Facia - Double DIN: 

Not Required

Steering Wheel Control Harness: 

Required, also requires radio brand specific patch lead

Primary Harness: 

Required, may require a secondary harness

Antenna Adaptor: 

Not Required

Additional Products

T Harness (for adding aftermarket bluetooth car kits): 

Available
Images
About this Vehicle

Dates: 

Jan 2002 through Nov 2007

Manufacturer: 

  • Subaru

Sub-Model: 

79V

Chassis Type: 

  • 4x4
  • Wagon

Place of Origin: 

Japan

Tags: 

  • Wagon
  • 4x4
  • Crossover
  • Forester
  • SG
  • 79V
  • Subaru

Subaru Forester

The second generation Subaru Forester featured several fine-tune improvements over the past model. The 2003 Forester features weight-saving refinements such as an aluminum hood, perforated rails, and a hydro-formed front sub-frame. The Forester had three main models available in Australia until July 2005: The X - naturally aspirated 2.5 L flat-4, 112 kW (150 hp), XS - naturally aspirated 2.5 L flat-4, 112 kW (150 hp) and the XT - turbocharged 2.5 L flat-4, 155 kW (208 hp). The face lifted models were offered as the same models, but with upgraded engines.

Information provided by: http://en.wikipedia.org/wiki/Subaru_Forester#First_generation_.28SF.2C_1997.E2.80.932002.29

In 2008 the last of the 79V series changed to the new dash Refer to Forester 2008 -

Wiring Information
APS58/APS52 and APS332 for rear speakers
APS32 and APS323 for Front Speakers

Speaker Cavities
Front: 6-1/2"
Rear: 5.25"